[FCP-L] Re: iMac & HDMI

Hi Matthias

You can use a Matrox MXO to output HD/SD SDI (using a Mini DIsplay Port to DVI adaptor in order to connect the device to the iMac) ... although please note that at present Matrox don't have a qualified Snow Leopard driver for the MXO (I think they might be still waiting on support from Apple to enable the MXO to work properly under Snow Leopard)

You can also use a Motu V4HD to output HD/SD SDI or HDMI (using the Firewire 800 connection to connect the device to the iMac) ... the Motu apparently allows daisy chaining FW800 devices so you still have a viable media capture/storage solution.

Best
Andy

--- In FinalCutPro-L@yahoogroups.com, "Robin S. Kurz" <robin.kurz@...> wrote:
>
> Hmmm... seeing that the only possible video output from an iMac is via
> the Mini-Display port...
>
> http://tinyurl.com/yl4zlkv
>
> - RK
>
>
>
> On 07.11.2009, at 13:41, Matthias Heuer wrote:
>
> > Hi all,
> >
> > I am planning to run FCP 6 on the new Quad-Core iMac. During the
> > editing
> > I'd like to see the Canvas on a seperate screen. AJA Kona f.e. can
> > feed
> > a screen via SDI or Composite. Is there a pice of hardware fitting to
> > iMac, beeing able to feed my Screen via HDMI? It not: via SDI?
> >
> > Thanks - Matthias
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/