Re: [FCP-L] OL A Request- now Butterfly Circus

the great thing is, it won top prize. i hope to see more from the
director sooner rather than later..

the Rift was pretty well done too.. a few odd camera movements or
framings, but the story telling was pretty darn good, and the
execution of it just as well..

marc
On Nov 7, 2009, at 6:59 PM, IAN WILSON wrote:

> Just watched Butterfly Circus, what a delight.
>
> On 08/11/2009, at 10:27 AM, Steve Hullfish wrote:
>
> > I agree. Butterfly Circus is one of the finest short films I've seen
> > in a long time.
> >
> > On Nov 6, 2009, at 10:28 AM, Marc Fisher wrote:
> >
> >> was it the Doorpost film project?
> >> www.thedoorpost.com
> >>
> >> if not, well, you should check out The Butterfly Circus.
> >>
> >> marc
> >>
> >>
> >> On Nov 6, 2009, at 6:54 AM, Sharon wrote:
> >>
> >>> Awhile ago someone had a link on here to a shorts movie
> competition.
> >>> I inadvertently deleted that email. Could someone please repost
> the
> >>> link.
> >>>
> >>> Thanks
> >>> Sharon
> >>>
> >>>>
> >>>
> >>> [Non-text portions of this message have been removed]
> >>>
> >>>
> >>>
> >>
> >> Marc Fisher
> >> cav2ya@sbcglobal.net
> >>
> >>
> >>
> >>
> >>
> >> [Non-text portions of this message have been removed]
> >>
> >>
> >>
> >> ------------------------------------
> >>
> >> To learn more about the FinalCutPro-L group, please visit
> >> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
> >>
> >>
> >>
> >>
> >
> >
> >
> > ------------------------------------
> >
> > To learn more about the FinalCutPro-L group, please visit
> > http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
> >
> >
> >
>
> Colortape Productions
> 222a Bay Street
> PORT MELBOURNE, VICTORIA 3207
> AUSTRALIA
> +61 3 9580 5098
> m 0418 327 082
> Skype idwctp
>
> IAN WILSON
>
> http://twitter.com/wilsonid
>
> [Non-text portions of this message have been removed]
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] OL A Request- now Butterfly Circus

Just watched Butterfly Circus, what a delight.

On 08/11/2009, at 10:27 AM, Steve Hullfish wrote:

> I agree. Butterfly Circus is one of the finest short films I've seen
> in a long time.
>
> On Nov 6, 2009, at 10:28 AM, Marc Fisher wrote:
>
>> was it the Doorpost film project?
>> www.thedoorpost.com
>>
>> if not, well, you should check out The Butterfly Circus.
>>
>> marc
>>
>>
>> On Nov 6, 2009, at 6:54 AM, Sharon wrote:
>>
>>> Awhile ago someone had a link on here to a shorts movie competition.
>>> I inadvertently deleted that email. Could someone please repost the
>>> link.
>>>
>>> Thanks
>>> Sharon
>>>
>>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>
>> Marc Fisher
>> cav2ya@sbcglobal.net
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------
>>
>> To learn more about the FinalCutPro-L group, please visit
>> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> To learn more about the FinalCutPro-L group, please visit
> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>
>
>

Colortape Productions
222a Bay Street
PORT MELBOURNE, VICTORIA 3207
AUSTRALIA
+61 3 9580 5098
m 0418 327 082
Skype idwctp

IAN WILSON

http://twitter.com/wilsonid

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Re: OT: Anybody want ten thousand used IMX tapes?

I'll bet it can also be used as a deembedder to break out audio to a betasp. I'm doing that in a pinch with a digibeta.

--- In FinalCutPro-L@yahoogroups.com, tcurren <tcurren@...> wrote:
>
>
> On Nov 7, 2009, at 5:06:51 AM, Mark wrote:
>
> I think I might just use them as bricks and build a retaining wall in my back yard.
>
>      How do you think I feel watching our guys use our 40K IMX recorder as a remote control for the HDCAMSR decks while doing QCs?
>
>
> --
> Terence Curren
> Burbank, CA
> www.alphadogs.tv
> www.digitalservicestation.com
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] A Request

I did watch Butterfly circus which is why i wanted the name of the
site : ) I thought it was really well done...

On Nov 6, 2009, at 11:28 AM, Marc Fisher wrote:

> was it the Doorpost film project?
> www.thedoorpost.com
>
> if not, well, you should check out The Butterfly Circus.
>
> marc
>
>
> On Nov 6, 2009, at 6:54 AM, Sharon wrote:
>
>> Awhile ago someone had a link on here to a shorts movie competition.
>> I inadvertently deleted that email. Could someone please repost the
>> link.
>>
>> Thanks
>> Sharon
>>
>>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>
> Marc Fisher
> cav2ya@sbcglobal.net
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To learn more about the FinalCutPro-L group, please visit
> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>
>
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Hijacked email

Some folks (and lists!) have gotten "ebay" email from what seems to be my account.

It's not me. Please do not respond or repost these email.

I'm seeing if this is an isolated event or if I'm truly screwed.

Tim McLaughlin
Avid and Final Cut Pro Editor
http://www.mcltim.com
Phone (847) 358-0277
Cell (847) 370-4379

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Re: OT: Anybody want ten thousand used IMX tapes?

We've got some of those too, if you want more!

At least those decks will playback digibeta, so we can use 'em as feeders for making dubs.
(Still need standard def dubs for delivery requirement).

mark

--- In FinalCutPro-L@yahoogroups.com, tcurren <tcurren@...> wrote:
>
>
> On Nov 7, 2009, at 5:06:51 AM, Mark wrote:
>
> I think I might just use them as bricks and build a retaining wall in my back yard.
>
>      How do you think I feel watching our guys use our 40K IMX recorder as a remote control for the HDCAMSR decks while doing QCs?
>
>
> --
> Terence Curren
> Burbank, CA
> www.alphadogs.tv
> www.digitalservicestation.com
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] Re: Looking for budget transcription

What about finding a local kid - maybe a high school girl (or boy)
with years of speed text messaging skills - and pay her $5 an hour to
do the transcription on her computer. Or if you've got an unemployed
neighbor, they may be willing to do it cheaply.

On Nov 6, 2009, at 3:32 PM, Wes Plate wrote:

> On 11/6/09 1:14 PM, "john@digitalcut.com" <john@digitalcut.com> wrote:
>
> > Can't we try to keep the work in the US for the greater good? I use
> > Velma @ acetranscriptions:
> >
> > vmccune@gmail.com
>
> Thank you for the recommendation. I frankly don't care where the
> person
> transcribing is located, it just so happens that this project has zero
> budget and I want to play with ScriptSync so the money is coming out
> of my
> pocket. No, I don't have time to transcribe it myself.
>
> --
> Wes Plate
> Automatic Duck, Inc.
> http://www.automaticduck.com
>
>

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] A Request

I agree. Butterfly Circus is one of the finest short films I've seen
in a long time.

On Nov 6, 2009, at 10:28 AM, Marc Fisher wrote:

> was it the Doorpost film project?
> www.thedoorpost.com
>
> if not, well, you should check out The Butterfly Circus.
>
> marc
>
>
> On Nov 6, 2009, at 6:54 AM, Sharon wrote:
>
>> Awhile ago someone had a link on here to a shorts movie competition.
>> I inadvertently deleted that email. Could someone please repost the
>> link.
>>
>> Thanks
>> Sharon
>>
>>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>
> Marc Fisher
> cav2ya@sbcglobal.net
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To learn more about the FinalCutPro-L group, please visit
> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>
>
>
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Re: OT: Anybody want ten thousand used IMX tapes?

On Nov 7, 2009, at 5:06:51 AM, Mark wrote:

I think I might just use them as bricks and build a retaining wall in my back yard.

     How do you think I feel watching our guys use our 40K IMX recorder as a remote control for the HDCAMSR decks while doing QCs?

--
Terence Curren
Burbank, CA
www.alphadogs.tv
www.digitalservicestation.com

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] Cannot "Media Manage" a subclip?

On Nov 5, 2009, at 6:57 PM, Nick Meyers wrote:
> and it Media Manages (COPY, delete unused) just fine in FCP 6.06

I'm going to have to try again. Thanks for verifying that it should
work. The ball's in my court now.

> are you sure you un-tick every thing in the Media Manager that says
> "Include"?

I would be, except that it didn't work for me and did work for you.
Under the circumstances, I must suspect operator error. :0

> does it indicate it will trim the clip (in the two green bars at the
> top) and then NOT trim it?

That it definitely did. I'll need to try the whole thing again and
triple check everything. I'm thinking there might have been something
wrong with my destination. Because it did not return an error, I
might not have checked to see that my destination was valid.

Because I've had similar problems in the past, I might not have tried
hard enough.

Thanks,

Tod Hopkins
Hillmann & Carr Inc.
todhopkins@hillmanncarr.com

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Re: iMac & HDMI

Hi Matthias

You can use a Matrox MXO to output HD/SD SDI (using a Mini DIsplay Port to DVI adaptor in order to connect the device to the iMac) ... although please note that at present Matrox don't have a qualified Snow Leopard driver for the MXO (I think they might be still waiting on support from Apple to enable the MXO to work properly under Snow Leopard)

You can also use a Motu V4HD to output HD/SD SDI or HDMI (using the Firewire 800 connection to connect the device to the iMac) ... the Motu apparently allows daisy chaining FW800 devices so you still have a viable media capture/storage solution.

Best
Andy

--- In FinalCutPro-L@yahoogroups.com, "Robin S. Kurz" <robin.kurz@...> wrote:
>
> Hmmm... seeing that the only possible video output from an iMac is via
> the Mini-Display port...
>
> http://tinyurl.com/yl4zlkv
>
> - RK
>
>
>
> On 07.11.2009, at 13:41, Matthias Heuer wrote:
>
> > Hi all,
> >
> > I am planning to run FCP 6 on the new Quad-Core iMac. During the
> > editing
> > I'd like to see the Canvas on a seperate screen. AJA Kona f.e. can
> > feed
> > a screen via SDI or Composite. Is there a pice of hardware fitting to
> > iMac, beeing able to feed my Screen via HDMI? It not: via SDI?
> >
> > Thanks - Matthias
>
>
> [Non-text portions of this message have been removed]
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Re: Final Cut Studio (2009): Best Practices for creating title graphics

> Can anyone make sense of these pixel dimensions? 720 x 270 does not
> seem to be enough resolution for a DVD menu.
> Philip

Philip,

Note that this is related to custom menus for the Share method of
creating DVDs in FCP or Compressor and NOT menus or graphics to be
used in iDVD or DVD SP. Essentially these would be custom backgrounds
or logos.

At least in the NTSC case, this is actually 1/2 of the vertical
resolution of a 720x540 file, which would be one option for square
pixel graphics. So either they are using field-resolution graphics for
custom menus, or the document writer got totally confused between
fields and frames.

- Oliver

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] iMac & HDMI

Hmmm... seeing that the only possible video output from an iMac is via
the Mini-Display port...

http://tinyurl.com/yl4zlkv

- RK

On 07.11.2009, at 13:41, Matthias Heuer wrote:

> Hi all,
>
> I am planning to run FCP 6 on the new Quad-Core iMac. During the
> editing
> I'd like to see the Canvas on a seperate screen. AJA Kona f.e. can
> feed
> a screen via SDI or Composite. Is there a pice of hardware fitting to
> iMac, beeing able to feed my Screen via HDMI? It not: via SDI?
>
> Thanks - Matthias

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] Re: OT: Anybody want ten thousand used IMX tapes?

Or perhaps a really big domino tumble...

Donnie Rogers
VP of Technology
Grass Roots Media, Inc.
574-289-8437 Office
574-250-0155 Mobile
donnie@grassrootsmedia.net

On Nov 6, 2009, at 7:41 PM, Mark wrote:

> I think I might just use them as bricks and build a retaining wall
> in my back yard.
>
> Did I mention we've got lot's of Beta SP stock also?
>
> I feel like a typewriter salesman after people discovered word
> processors!
>
> mark
>
> --- In FinalCutPro-L@yahoogroups.com, "Andy" <andymees@...> wrote:
> >
> > You'll have to find a sculptor then :-)
> >
> > They could build a giant bull out of it and call it "Journey to
> the Oxcide" ... they could film themselves building it (on IMX tape)
> and then add that tape to the sculpture without ever having shown
> it ... it would be a powerful artistic statement and it would sell
> for millions.
> >
> > Or not ... maybe that tax break thing is the way to go.
> >
> >
> >
> >
> > --- In FinalCutPro-L@yahoogroups.com, "Mark" <markraudonis@> wrote:
> > >
> > > Ooops. Too late for that... we've degaussed everything back to
> snow.
> > >
> > > mark
> > >
> > >
> > > --- In FinalCutPro-L@yahoogroups.com, "Andy" <andymees@> wrote:
> > > >
> > > > Has to be an installation artist in your neck of the woods who
> would jump at access so so much raw material
> > > >
> > > >
> > > >
> > > >
> > > > --- In FinalCutPro-L@yahoogroups.com, "Mark" <markraudonis@>
> wrote:
> > > > >
> > > > > That's NOT a typo. Ten Thousand IMX tapes.
> > > > >
> > > > > We've left Standard Def behind, and these tapes are now
> > > > > surplus. I'm guessing no one on this list still uses this
> > > > > format, but if you know of anyone who does, and has any
> interest
> > > > > at all, please let them know about this.
> > > > >
> > > > > Thanks.
> > > > >
> > > > > Mark Raudonis
> > > > >
> > > >
> > >
> >
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] Yes it was the DoorPost ... thanks...

On Nov 6, 2009, at 11:28 AM, Marc Fisher wrote:

> was it the Doorpost film project?
> www.thedoorpost.com
>
> if not, well, you should check out The Butterfly Circus.
>
> marc
>
>
> On Nov 6, 2009, at 6:54 AM, Sharon wrote:
>
>> Awhile ago someone had a link on here to a shorts movie competition.
>> I inadvertently deleted that email. Could someone please repost the
>> link.
>>
>> Thanks
>> Sharon
>>
>>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>
> Marc Fisher
> cav2ya@sbcglobal.net
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> To learn more about the FinalCutPro-L group, please visit
> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>
>
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

[FCP-L] iMac & HDMI

Hi all,

I am planning to run FCP 6 on the new Quad-Core iMac. During the editing
I'd like to see the Canvas on a seperate screen. AJA Kona f.e. can feed
a screen via SDI or Composite. Is there a pice of hardware fitting to
iMac, beeing able to feed my Screen via HDMI? It not: via SDI?

Thanks - Matthias

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/

Re: [FCP-L] Final Cut Studio (2009): Best Practices for creating title graphics for use in the DVD setting of the Share feature

It's the resolution you want to use when encoding a "scope" movie for
a 16:9 enhanced (NTSC) DVD.

The resolution of the actual film frame is just about 720 x 480 for a
"Flat (1.85:1) film and 720 x 380 for a "scope" (2.35:1) film.
Contrast those resolutions with the corresponding ones for a
*letterbox* presentation (720 x 330 for flat and 720 x 270 for scope)
and you'll reap the benefits in particular with 16:9 televisions.

- RK

On 06.11.2009, at 20:54, Rick wrote:

> They do seem to be a bit out there.
> Rick Emery
> www.rickemery.com

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/