[FCP-L] Re: ProRes level change when playing vs stopped...

No, no range check, but I am now convinced I have a setting mismatch of some kind... I took the drive home with me last night, hooked it up there and fiddled about and eventually got some clips to work and others to act the opposite of what had been happening at work, in other words they would look one way parked and then go DARKER in play, backwards from what had been happening at work. So I labeled the clips good/not good goes dark, brought the drive into work and the ones labeled good look one way parked and go Brighter in play, and the ones labeled not good, at work play normally.
So, I think I need to dig into my settings (and manuals...) and find the difference.
Meanwhile, thanks for the help so far.
jeff c.

--- In FinalCutPro-L@yahoogroups.com, "Andy" <andymees@...> wrote:
>
> Do you perchance have "Range Check" turned on? If so, try switching it off and see if that produces the expected results.
>
>
>
>
>
> --- In FinalCutPro-L@yahoogroups.com, Ricardo <bad-dog@> wrote:
> >
> > I think some video cards can do this - different buffer for a stopped frame?
> >
> > R
> > ____________________
> > Ricardo Ismach
> > Casual Dog Productions, LLC
> > Portland, OR
> > Atlanta, GA
> > http://www.casualdog.org
> > bad-dog@
> >
> >
> >
> > On Nov 11, 2009, at 10:43 AM, Kerry Soloway wrote:
> >
> > > I have seen that happen with certain codecs, although I don't have enough
> > > experience with ProRes to say whether I've seen it with that.
> > >
> > > Does this happen in the Canvas and/or Viewer? What are your playback
> > > setting? What happens after you render?
> > >
> > > Kerry
> > > -------------------
> > > Kerry Soloway
> > > http://www.NightingaleEditorial.com
> > > 201-247-4110
> > > ksoloway@
> > >
> > > Watch "Consuelo Mack/WealthTrack" weekly on PBS. Check your local listings.
> > >
> > >
> > > On Wed, Nov 11, 2009 at 1:28 PM, jmcbrg <urspam666@> wrote:
> > >
> > >>
> > >>
> > >> I'm not sure what I'm doing wrong, but when I capture at any of the ProRes
> > >> settings, (proxy, LT, or 422) there is a level change between the footage
> > >> parked and when it is playing. I thought it was the Gamma correction
> > >> Auto/none setting, but that doesn't make any difference. I'm capturing from
> > >> a Panasonic HD1400 via firewire. When I capture at DVCPro HD there is no
> > >> shift. Thanks in advance for any help.
> > >> jeff c.
> > >>
> > >>
> > >>
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> > > ------------------------------------
> > >
> > > To learn more about the FinalCutPro-L group, please visit
> > > http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
> > >
> > >
> > >
> >
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/