Re: [FCP-L] VO Tool in FCP

Yes, what Jeff said.

In my experience you may have to swap to another input and back to your USB mic a couple of times in the VO tool before FCP figures out what you want it to do.

On Dec 3, 2009, at 9:12 AM, jeffsengpiehl wrote:

> Change the Audio input in system prefs to any OTHER source then the one desired. Apply, then change it back.. should wake it back up.
>
> JDS
>
> --- In FinalCutPro-L@yahoogroups.com, Don Stark <Don@...> wrote:
>>
>> Probably an obvious question, but did you check system preferences to make sure the USB mic is the input device in the preferences also? I use a USB mic all the time for temp VOs on my videos without any issues.
>>
>> Don
>>
>> Don Stark
>> ScubaVision Productions
>> Boston, MA USA and Providenciales, Turks & Caicos Islands, BWI
>> Weekly Video Netcast at www.ScubaVisions.TV
>>
>>
>>
>>
>> On Dec 3, 2009, at 10:42 AM, mr_ree_mann wrote:
>>
>>> I've used the VO Tool a few years ago through a mixer and into a Kona... but I am at a place that uses a USB mic into FCP for temp VO.
>>>
>>> Its not working and I must be missing as step.
>>>
>>> I can see signal on the meter so know my signal is getting in through the mic and correct input is selected.
>>>
>>> I set record area in the seq with in and out points.
>>>
>>> I hit record, countdown starts.
>>>
>>> Then... nothing shows on the meter when I speak and when I stop recording, nothing appears in the timeline.
>>>
>>> George
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> To learn more about the FinalCutPro-L group, please visit
>>> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>>>
>>>
>>>
>>>
>>
>
>
>
>
> ------------------------------------
>
> To learn more about the FinalCutPro-L group, please visit
> http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
>
>
>

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/