Re: [FCP-L] VO Tool in FCP

Double check your system pref audio pane...make sure audio in and audio out
both are set to the Kona card. Then in the VO window make sure the popup is
set correctly. On my system when the usb mic is connected, the popup
reveals a setting called ³ak5370², which makes the whole thing work.

Joe Stern
CNN Post Production
Atlanta

On 12/3/09 10:42 AM, "mr_ree_mann" <mr_ree_mann@yahoo.com> wrote:

>
>
>
>
>
> I've used the VO Tool a few years ago through a mixer and into a Kona... but I
> am at a place that uses a USB mic into FCP for temp VO.
>
> Its not working and I must be missing as step.
>
> I can see signal on the meter so know my signal is getting in through the mic
> and correct input is selected.
>
> I set record area in the seq with in and out points.
>
> I hit record, countdown starts.
>
> Then... nothing shows on the meter when I speak and when I stop recording,
> nothing appears in the timeline.
>
> George
>
>
>
>
>

[Non-text portions of this message have been removed]

------------------------------------

To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links

<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/

<*> Your email settings:
Individual Email | Traditional

<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)

<*> To change settings via email:
FinalCutPro-L-digest@yahoogroups.com
FinalCutPro-L-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/