Rick Emery
www.rickemery.com
________________________________
From: Kerry Soloway <ksoloway@gmail.com>
To: Final Cut Pro L <FinalCutPro-L@yahoogroups.com>
Sent: Mon, November 2, 2009 8:41:10 AM
Subject: [FCP-L] Glyph Portagig hard drive
I had a vendor send me a Glyph Portagig hard drive last week with video
files on it. It is buss-powered so he didn't provide me with the optional
external power supply. At the office, on a five-year old G5, I was unable to
read any data, although the System Profiler saw that there was a drive
attached. This was the case with both the FW 800 and USB 2 connections.
So I took the drive home to test it on my recent generation Intel iMac. In
this case, the System Profiler wouldn't see the driver, however, if I hooked
up BOTH the FW 800 and USB 2 ports, it seemed like there was enough power to
access the drive. Although the Profiler didn't see it, I was able to view it
on the Desktop and access the necessary files, to a degree.
It would copy for several minutes and then stop giving me an error message
that I disconnected the hard drive. Then it would reappear and continue
copying. In the end, I chose to transfer a few files, eject and disconnect
the hard drive allowing it to cool down, and then reconnect and repeat. In
the end I was able to retrieve all of my data but I was wondering if anybody
else has had a similar experience.
I assume that there was just not enough power getting to the drive to
operate reliably and I have asked for the power supply in order to test my
theory. Am I missing something?
Kerry
------------ -------
Kerry Soloway
http://www.Nighting aleEditorial. com
201-247-4110 201-247-4110
ksoloway@gmail. com
Fred Friendly Seminars' "Minds on the Edge: Facing Mental Illness" is airing
in October. "Consuelo Mack/WealthTrack" airs weekly. Both on PBS. Check
your local listings.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
------------------------------------
To learn more about the FinalCutPro-L group, please visit
http://groups.yahoo.com/group/FinalCutPro-LYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/FinalCutPro-L/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/FinalCutPro-L/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:FinalCutPro-L-digest@yahoogroups.com
mailto:FinalCutPro-L-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
FinalCutPro-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
No comments:
Post a Comment